Telemator
®
Equipment and
cabling management
software system
Push Page Down or mouse button 1 / 41
Telemator
Software for registration and administration of:
• Core-, pair- and patch panel based networks
• Copper-, fiber- and transmission networks
• Small and big in- and outdoor networks
• In both projecting-, installation- and management
phase
www.mxdata.no
2
Telemator – a common
memory
T elem ator
A com m on m em ory
E conom y
Projecting
Installation
D elivery
M anagem ent
www.mxdata.no
3
Telemator in an
organization
Organization
Customers/
suppliers
Telemator
Telemator
Working
tasks
Registered
Data
information
It is important to obtain a good
teamwork across the
organization in relation to
working tasks, registered
information and suppliers /
customers of internal, leased out
and any leased in circuits.
Telemator is central to these
factors.
www.mxdata.no
4
Telemator – the connecting link
Telemator
Fiber cable
Copper cable
Management system 1
Management system 2
Management system 3
Telemator may be the ”main reference” towards all
systems, and gives work orders for both connections and
programming in the different systems
www.mxdata.no
5
Telemator
Others
Telemator consists of 4
modules
ElektroPartner
Drawing-
Cable map
DAK
program
GIS
Projecting module
Trace module
Base module
Net diagram module
www.mxdata.no
6
The base module is divided
into 5 main cardfiles
•Point card file
•Equipment card file
•Cable card file
•Circuit card file
•User card file
www.mxdata.no
7
Point cardfile
In the Point cardfile you can register the
whole specter of fixed points such as:
• Telecom room, equipment room,
communication room, nodes, sites
• Distributors (both outdoor and indoor)
• Patch panel
• Workplace contacts
• Deducting manhole (fiber, copper)
• Straight splices (1:1)
www.mxdata.no
8
Point cardfile screen
www.mxdata.no
9
Equipment cardfile
Register any kind of equipment
here, such as:
• Central equipment
• Transmission equipment
• Local and customer equipment
Examples of central
equipment
 Telephone
centrals
 Calling centrals
 Servers
 Fire centrals
 Alarm centrals
www.mxdata.no
11
Examples of local and
customer equipment
Telephone sets
 Calling devices
 Personal computers
 Fax machines
 Printers
 Signal systems
 Routers

www.mxdata.no
12
Examples of transmission
equipment
• Multiplexer
• High order multiplexer
• Sub multiplexer
• Modem
• Carrier frequency
•
•
•
•
equipment (CF)
Fiber termination
equipment
Radio link equipment
Point to multipoint radio
Digital cross connection
www.mxdata.no
• Drop insert
• HUB
• Router
• Switch
• Satellite connection
• SDH net
• PDH net
• ATM net
• Frame Relay net
13
Equipment cardfile level
Four levels are used to register
any kind of equipment :
Level 1 – general information
Level 2 – printed circuit board
Level 3 –ports on printed circuit board
Level 4 – connections w/signal on each port
www.mxdata.no
14
Equipment cardfile
screen
www.mxdata.no
15
Cable cardfile
In the Cable card file, you can register all types of
cables, such as:
• Copper cables based on pairs
• Copper cables based on single conductors (coax)
• Fiber cables
You can also terminate the cable ends in equipments,
distributors, contacts or patch panels
www.mxdata.no
16
Cable cardfile screen
www.mxdata.no
17
Circuit cardfile
All of the network’s circuits are registered in
the Circuit card file.
A circuit is also called a line, a signal path, a
connection or a loop.
Examples of circuits:
• Telephone circuit
• Data circuit
• 622 Mb SDH circuit
• 155 Mb ATM circuit
www.mxdata.no
18
Circuit cardfile screen
www.mxdata.no
19
Customer cardfile
In the Customer card file you register all users and
connect them to the circuits they use
A user may be :
• An employee
• A customer that leases circuits from your company
• A function in your company, i.e. a control center
• A supplier of leased circuits
www.mxdata.no
20
User cardfile screen
www.mxdata.no
21
Circuit routing
Other word for routing is crossing or patching.
You can route a circuit in three different ways:
• Fully automatic routing from an equipment
•
•
or a point to another equipment or point in
the net
Automatic routing on one cable, Telemator
uses the first unoccupied and fault-free cores
Manual routing on the core you want in the
cable you choose
www.mxdata.no
22
Prints (the 3 most frequently used) (1 of 2)
The installer may use:
• A ”Circuit card” or a ”Graphical circuit card”
when connecting a circuit, to see how to
connect in all different points the circuit goes
through
• A ”Cross card” when crossing many circuits
in the same point
• A ”Point card” to terminate many cables in
one point
There are also a lot of other prints for different
purposes
www.mxdata.no
23
A section in Circuit card
www.mxdata.no
24
Network diagram
Automatically draws a graphical overview of the
network. This is based on information registered in
the Base module.
The network diagram shows:
• Equipments
• Points
• Cables
• Wireless connections
Prints are paginated for printers or plotters
www.mxdata.no
25
Network diagram screen
www.mxdata.no
26
Cable trace module
•
•
•
•
Registration of ditches and similar, that might
contain pipes and sub-pipes
Cables can be placed directly into ditches, pipes
or sub-pipes
Traces in most digital cable maps (GIS) can be
connected towards Telemator
When you choose a trace on the map, Telemator
will show you cables and pipes in the trace. You
can also easily see circuits/lines inside the cable
www.mxdata.no
32
Functionality for fiber
networks
•
•
•
•
•
•
Shows each fiber in the cables
Welding of fibers in splices
Splice-card with colors
Registration of fiber manholes where the cable
are spliced or coiled
When using manual routing Telemator finds
all fibers spliced together into one trace
Print that simplifies analysis of test reports
www.mxdata.no
33
Functionality for
transmission systems
•
•
•
•
•
•
•
Lower and higher order circuits
Time slots and channels
Digital cross-connections
Wireless connections on radio (-link) equipment
Patching between equipment and patch panel
inside telecom-rooms and the like
Shows both near- and remote end of a
”transmission-jump” in the same screen picture
Relation between local and high order side in
equipments
www.mxdata.no
34
Functionality for patch
panels
• Termination of contacts down to pin-level
• Show contacts with or without pins
• Rout (patch) directly on contacts (built-in
functionality makes sure that pins in the
first contact are connected with correct
pins in the other contact)
www.mxdata.no
35
Labour saving functions
• The ”Copy” function creates one or multiple equal
elements in one operation – All earlier registrations can be
used as templates
• Create libraries containing templates for equipments
• Termination of several cables in one distributor in one
operation
• Routing of multiple circuits in one or several cables in one
operation
• Renaming of several points, equipments, cables or circuits
in one operation
www.mxdata.no
36
The database
• Relational database
• xBase file format (one of the best known)
• Data can be read directly from a lot of
•
•
common PC-tools like Word and Excel
Demands almost no administration
Multi-user program
www.mxdata.no
37
Multi- or single user

Anna
F ile s e rve r
P e te r
S in g le u s e r
www.mxdata.no
Multi-user via
common file server
 Single user at stand
alone PC
 Access for the
different user are
read/write or just
read
38
Courses
• Courses arranged at customer’s location
• The courses length are normally 2 days
www.mxdata.no
39
Consulting
• “On the job training” for teaching you how to
•
•
•
use Telemator in your own network
Start help to get you started in early stages of
registration
Converting of data from other data systems
Registration help for networks with or without
existing documentation
www.mxdata.no
40
Customers
Some known names are:












Telecom companies
Installation contractors
Oil drilling platforms
Factories
Airports
Railway networks
Road administrators
Energy suppliers
Hospitals
Schools
Military camps
Office buildings



Norge: Avinor, BKK bredbånd, Bravida,
Bredbåndsfabrikken, Forsvaret,
Rikshospitalet, Song Networks, Telenor,
TeleDanmark
Sverige: Arjeplog kommun, ComDaTe,
Citylink, Gotland Energi, Kalix kommun,
Luleå Kommun, RegNet, Oskarshamn
Energi, Song Networks, Ventelo
Danmark: DSB, Luftfartsvæsenet, Song
Networks
Some known constructions are:


Troll B, one of the largest floating
production platforms in the world.
Europe's most modern air control center in
Røyken, Norway.
www.mxdata.no
41
On the Internet
Go to www.mxdata.no, and find more
detailed information about Telemator
and the different program modules
• Download a FREE evaluation version of Telemator in
which you can register up to 15 cables
• News about the latest version
• Order program, maintenance agreement and courses
• The Telemator user interface can be switched between
Norwegian, Swedish and English languages.
www.mxdata.no
42
End
You have now been watching the functionality of
®
Telemator
Thank you for your attention!
Any questions - don't wait to contact us!
Phone: (+47) 76 95 13 50
E-mail: [email protected]
Internet: www.telemator.com
www.mxdata.no
43
Descargar

TelematorPresent_EN.