UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
STATE UNIVERSITY OF NUEVO LEON
MECHANICAL AND ENGINEERING SCHOOL
Presentado por:
Ing. Esteban Báez Villarreal
Director
OUR MISSION:
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Contribute to creation, preservation and dissemination of culture, shaping professionals
in the
Facultad de Ingeniería Mecánica y Eléctrica
Mechanic Engineering, Electric, Electronics, Systems, Automation, Materials, Manufacturing,
Mechatronics, Aerospace, Management and related areas, having social values, searching the
excellence in the graduates training, promoting research and technological development; oriented to
anticipate and satisfy the needs of the society.
Values





Institutional Pride
Honesty
Presentado por:
Compromise
Ing. Esteban Báez Villarreal
Responsibility
Discipline Director
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Bachelor degrees’
Presentado por:
Ing. Esteban Báez Villarreal
Director
Bachelor Degrees’
Career
The academic programs consist on ten different strategic engineering
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Undergraduate students
areas:
Facultad de Ingeniería Mecánica y Eléctrica
20%
 1956 Electrical and Mechanical









1962
1975
1975
1975
2000
2000
2004
2007
2009
Mechanical Adminsitrator
Electronics and communications
Electronics and Automation
Systems Administrator
Manufacturing
Materials
Presentado por:
Mechatronics
Ing. Esteban Báez Villarreal
Aeronautics
Director
software Technology
Mlectrical and Mechanical
Mechanical Adminsitrator
Electronics and communications
Electronics and Automation
Systems Administrator
Manufacturing
Materials
Mechatronics
Aeronautics
Software Technology
Total
10%
1906
2421
1238
1717
16%
3263
180
138
925
1398 1%
125
1%
12092
14%
8%
1% 1%
27%
Granted degrees
7%
15%
18%
About 2000 students get graduated per year.
Mlectrical and Mechanical
Mechanical Adminsitrator
Electronics and communications
Electronics and Automation
Systems Administrator
Manufacturing
Materials
Mechatronics
Aeronautics
16%
306
335
141
290
582
28
19
Total
1701
31%
2%
8%
1% 1%
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Postgraduate Degrees
Presentado por:
Ing. Esteban Báez Villarreal
Director
Postgraduate Degrees
Master Degrees
Some of the 11 master degree programs given by the Mechanical and
Electrical Engineering School are offered in two modalitites:
UNIVERSIDAD Research
AUTÓNOMA DE NUEVO LEÓN
Oriented Programs and Industrial Experience.
Facultad de Ingeniería Mecánica y Eléctrica
596 graduate students
Master Degrees Programs
Research Oriented Programs
•
Electrical Engineering
•
Mechanical Engineering
Presentado por:
•
Computing
Engineering
Ing. Esteban
Báez Villarreal
•
Thermal
Engineering
Director
•
Thermal
and sutainable Energy
Industrial Experience oriented programs
•
Business and industrial administration
•
Informatics
•
Logistics and chain supply
•
Mechatronics
•
Mechanical Engineering
•
Telecommunications
•
Manufacturing Engineering
Postgraduate Degrees
Master Degrees
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Doctoral Programs
• Electrical Engineering
• Materials Science
• Systems Engineering
Tailor Made specializations
Facultad de Ingeniería Mecánica y Eléctrica
INDUSTRIA
FIME
Electronical systems of thermal fluids power protection and
Presentado por:
Telecommunications.
Ing. Esteban Báez Villarreal
A third category
of the bachelor degree is offered as Tailor Made
Director
Specialization,
this program involves a flexible academic program
including the industrial society that is adapted to the academic courses to
find solutions to specific necesities.
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Continuing Education
Presentado por:
Ing. Esteban Báez Villarreal
Director
Continuing Education
Educational offers
UNIVERSIDAD
AUTÓNOMA DE NUEVO LEÓN
Continuing education offers technological specialization
courses:
Facultad de Ingeniería Mecánica y Eléctrica
 Specialization Training
 Technical Training
Specialization Training (more than 40 courses)
* Telecommunications
• Security and risks prevention at work
Presentado por:
• Communications and Structured Wiring
Ing. Esteban Báez Villarreal
• Software
engineering
Director
Continuing Education
Educational offers
Technical Training (4 technical degrees)
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
•
•
•
•
Electrical and Electronics
Technical Programmer
Electromechanical Maintenance
Computer Numerical Control Technician
Courses (More than 70 training courses)
•
•
•
•
•
Presentado por:
Computer Numerical Control
Ing. Esteban Báez Villarreal
Logistics
Director
Software
Manufacturing
Electronics
Continuing Education
Principal Projetcs
The Mechanical and Electrical Engineering School has as a goal to
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
establish a training program to cover the automotive industry needs. The
Facultad de Ingeniería Mecánica y Eléctrica
Electomecanic Maintance Technical Program was made for Cluster
Automotriz de Nuevo León A.C. (CLAUT)
The Electromecanic Maintance Technical Training Program, (TECMEC)
wanted to find the solutions of qualified technical problems, as well as
achieve the conversion to operator from technician, crystallizing concrete
actions in the human development of the Factory workers, with the
support ofPresentado
teacher’s
por: experience in this program. Also, it has origins in the
technical training
program
Ing. Esteban Báez
Villarreal of the International Motors and Buses Factory,
Director given
it has been
by Mechanical Electrical Engineering School, with
success
Continuing Education
Principal Projects
The program benefits to Cluster Automotriz de Nuevo León A. C. (CLAUT)
AUTÓNOMA DE NUEVO of
LEÓN
factories, civil partnership which integrates first UNIVERSIDAD
tier manufactures
de Ingeniería
Mecánica y Eléctrica
Automotive Industry. Through out strategic alliance Facultad
between
Universities,
Industries and Government.
This program is composed by 14 modules with total duration of 272 training
hours in Electricity, Machines, Pneumatic, Hydraulic, Electrical and Automotive
to form the profile of TECMEC.
The factories which composed Cluster Automotriz are Cluster Arnecom, Denso,
Presentado por:
Johnson Controls, Katcon, Metalsa, Nemak, Sisamex, Takata, Ternium, Vitro,
Ing. Esteban Báez Villarreal
International,
Ficosa, among others.
Director
Continuing Studies
Principal Projects
 Thanks to its success, this program will be applied at Nicaragua and in other states of
Mexico such as Chiapas, Chihuahua, San Luis Potosí, among others.
Generation
Students
Initial Date
UNIVERSIDADFinal
AUTÓNOMA
Date DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
First
19
August/2nd/2008
October/10th/2009
Second
19
September/6th/2008
November/14th/2009
Third
14
October/11th/2008
December/19th/2009
13
March/14th/2009
May/15th/2010
22
November/14th/2009
March/12th/2011
Sixth
25
January/30th/2010
May/21st/2011
Seventh
25
February/20th/2010
June/18th/2011
Total
137
Fourth
Presentado por:
Ing. Esteban Báez Villarreal
Fifth
Director
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Engineering Services
Presentado por:
Ing. Esteban Báez Villarreal
Director
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
The Mechanical Electrical Engineering School has been
contribute in the
Facultad de Ingeniería Mecánica y Eléctrica
Industrial section, participating in multiple projects, in the
action areas, such
as:
• Electric
• Materials
• Electronics
• Mecatronics
Presentado por:
• Mechanical
• Aeronautical
Ing. Esteban Báez Villarreal
Director
• Design
• Administration
• Vibration and Acoustics
• Sciences
• Information Technologies
• Telecommunications
AUTÓNOMA DE NUEVO LEÓN
Our school has a long tradition working on the practicalUNIVERSIDAD
problems,
the union
de Ingeniería Mecánica y Eléctrica
of teacher’s experience and the last generation providesFacultad
good
conditions to
create technological solutions.
Recently, the Mechanical Electrical Engineering School was recognized
as
national leader in the development of de proposal related to investigation.
The major services of engineering are:
•
•
•
•
•
•
Presentado por:
TutorialIng. Esteban Báez Villarreal
Assistance
Director
Laboratory Test
Certifications
Maintenance
Operative Services
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Research and Development
Presentado por:
Ing. Esteban Báez Villarreal
Director
Research and Development
Research Areas
Scientific and technological research represents one of the priority, there
fore, the Mechanical Electrical Engineering School,UNIVERSIDAD
develops
different
AUTÓNOMA
DE NUEVO LEÓN
research projects in six strategic areas.
Facultad de Ingeniería Mecánica y Eléctrica
Material Science
Invoice Analysis
Computational Simulation
Nanotechnology
Technological and Software
Information
Presentado por:
Adaptable Systems
Use of mobile Ing.
devices
Esteban Báez Villarreal
Optimization, complexity
and data analysis.
Director
Electrical Engineering
Protected Transmission and Electrical
Power supplied.
Power and control Operative System
Non conventional energy sources in power
systems
Control Design System
Mecatronics
Robotics y Autotronics
Avionics
Thermal fluids
Machinery Fluids Design
Heat Transference and Numeric
Models
Fluids Circulation
Systems Engineering
Optimization Power Supplied
Metahuristic
Operational Sequences
Estochastic Processes
The knowledge development by the research give fast solutions to the
national and international companies.
Research and Development
Major Projects in Energy Area
The Mechanical and Electrical Engineering School has been participated in
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
many research and development projects that is why it has wide experience in
Facultad de Ingeniería Mecánica y Eléctrica
Entailment, Industrial and Public sector.
In the following chart are some examples in the Energy Area.
Major Projects
Design, develop and optimization catalic convertor through the use of numerical models.
Presentado por:
OptimizationIng.
of the
austenitized
and tempered processes in the Thermal Treatment
Esteban
Báez Villarreal
Department Director
for chassis beams.
Contaminant Emission Characterization through the phenomenological analysis and
Combustion Modeling of fossil fuels and bioenergy.
Contaminant reduction of emission in diesel motors using alternative fuels.
Investigación y Desarrollo
Principales Proyectos en el área de Energía
International Thematic Network Project “Renewable Energy and
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Efficient use of Energy”
Facultad de Ingeniería Mecánica y Eléctrica
CENIT – E-diesel mixture evaluation and EB diesel through lab
tests, in engine bank and punk bank UCTRO70162.
Analysis of the combined effect of the use of biocombustible
and the injection strategies in the emission and the NOX
atmospheric reactivity and the emmited diesel engine self propelled.
Presentado por:
Ing. Esteban Báez Villarreal
Director
Investigación y Desarrollo
Principales Proyectos en el área de Energía
Characterization
of
phenomenological analysis
bioenergetics.
contaminated
and modeling of
emission
through
NUEVO LEÓN
theUNIVERSIDAD
fossil AUTÓNOMA
fuels DEand
Facultad de Ingeniería Mecánica y Eléctrica
Contribution to the reduction of contaminanting emissions in
diesel engines using alternatives fuels.
t = 0.58ms
t = 0.61ms
t = 0.64ms
t = 0.67ms
t = 0.7ms
t = 0.73ms
Presentado por:
t = 1.21msIng. Esteban
t = 1.36ms
t = 1.51ms
Báez Villarreal
t = 1.66ms
t = 1.81ms
t = 1.96ms
t = 2.56ms
t = 2.71ms
t = 2.86ms
Director
t = 2.11ms
t = 2.26ms
t = 2.41ms
Research and Development
Main Projects in the Energy Area
Project: Design, development and optimization of catalytic converters
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
through numerical models.
Facultad de Ingeniería Mecánica y Eléctrica
Presentado por:
Ing. Esteban Báez Villarreal
Director
Contorno de temperaturas
Research and Development
Main Projects in the Energy Area
Project: Optimization of the austenitized and tempered processes in the
Thermal Treatment Department for chassis beams.
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Presentado por:
Ing. Esteban Báez Villarreal
Director
Research and Development
Main projects in the Materials Area
In the Materials Area the Mechanical and Electrical Engineering School has a
solid experience in several research and development projects mainly related
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
to the fields of Automotive and Aerospace Industry.
Facultad de Ingeniería Mecánica y Eléctrica
Here are some examples in the Materials Area:
Related Projects of the Mechanical and Electrical Engineering School of the State University of Nuevo
León in stimulus programs for Innovation 2009 in the Automotive Sector.
Development of Technology for the Production of compacted graphite iron pieces
Development, characterization and optimization of aerospace alloys handling
Aluminum alloys development
Presentado por:
New developments and optimization in automotive heads
Ing. Esteban Báez Villarreal
Development of binders
Director
Thermal treatments in monoblocks and aluminum heads
Creation of the Center for Technology and Innovation
Scientific and technological infrastructure of laboratories and pilot plants of the Center for Viakable Advanced
Technology
Tribological analysis development, new recovering and lubricant for forming molds
Development of the assurance robustness in the process of forming special steels
Design and development of lightweight chassis for commercial vehicles market 2015
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Cooperation Agreements
Presentado por:
Ing. Esteban Báez Villarreal
Director
Cooperation Agreements
Academic Cooperation
The Mechanicals and Electrical Engineering School has a number of international
agreements, to carry out exchanges of teachers and students, as well as joint
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
cooperation in final projects.
Facultad de Ingeniería Mecánica y Eléctrica
UNIVERSIDAD
PAUL SABATIER
UT, AUSTIN,
TEXAS
USA
UNIVERSIDAD
DE BURGOS
Presentado por:
Ing. Esteban Báez Villarreal
Director
Cooperation Agreements
Industrial Cooperation
Our institution has a strong entailment with industry by participating in several
services, according to the needs of the industry in Mexico.
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Presentado por:
Ing. Esteban Báez Villarreal
Director
ASHRAE
FICOSA NORTH
AMERICA
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Facultad de Ingeniería Mecánica y Eléctrica
Research and Development
Departments
Presentado por:
Ing. Esteban Báez Villarreal
Director
CIIDIT
Innovation, Research and Development Centers in the Engineering and
Technology Areas
The Innovation, Research and Development Centers in the
Engineering and Technology Areas (CIIDIT by its spanish UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
acronym) it is a multidisciplinary and excellence integrator Facultad de Ingeniería Mecánica y Eléctrica
center where is generated and applied a innovative way in
the frontier knowledge in the engineering and technology
areas, it covers the areas of:
 Nanotechnology
Advanced Materials
 Mechatronics
 Software
Engineering
Presentado por:
Ing. Esteban Báez Villarreal
Agreements
Director
 Dassault Systems
France Ministry of Education
 University of Texas at Austin
The Innovation, Research and Development Centers in the
Engineering and Technology Areas has a computer design
lab “PLM (Program Life Management)” oriented to
automotive and aeronautic industry, first place in Mexico and
forth worldwide.
CIIIA
Research and Innovation Center in the Aeronautics Engineering Area
DE NUEVO LEÓN
What is the Research and Innovation CenterUNIVERSIDAD
in theAUTÓNOMA
Aeronautic
Facultad de Ingeniería Mecánica y Eléctrica
Engineering Area (CIIIA by its spanish acronym)?
 It will be the technological support in the aeronautics and aerospacials
industry at the north part of Mexico.
 Promoting high-value projects in the productive chain, developing highly
engineering, research, and technological innovation in the several
branches of aerospace.
 With activities aimed at developing new technologies, products, materials
and processes.
Presentado por:
Main Activities
atBáez
the
CIIIA
Ing. Esteban
Villarreal
Director
 Research
and Technological Development
 Creation of Human Capital for the Aeronautics Area.
 Technological Services for the related areas.
CIIIA
Innovation, Research and Development Centers in the Engineering and
Technology Areas
Land Area: 3,600 m2.
UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN
Total Construction: 7,367 m2.
Facultad de Ingeniería Mecánica y Eléctrica
Initial Investment: 63 millions of pesos in construction e infrastructure
Investment in labs equipment: 24 millions of pesos.
Total Investment by now: 87 millions of pesos.
The CIIIA will have:
 3 levels that will accommodate classrooms and air-conditioned labs
 12 labs
 1 hangar to degree lab practices
Presentado por:
 Library
Esteban Báez Villarreal
 4 PLM Ing.
Rooms(Program
Life Management) to the aeronautics design
TrainingDirector
Rooms
 Teacher Researchers Cubicles
 Business Offices
 Administrative Offices
Multipurpose hall for 500 people
CCPI
Competitiveness and Productivity Center in the Engineering Area
UNIVERSIDAD
AUTÓNOMA DE NUEVO LEÓN
Provides highly skilled services in management, planning,
development,
project monitoring and control of state enterprise sector.Facultad de Ingeniería Mecánica y Eléctrica
The innovation of the services of the CCPI (by its Spanish acronym) is
based on the triple helix model, where state-owned industry, private
companies and universities play a vital role within each project.
Presentado por:
Ing. Esteban Báez Villarreal
Director
I really want to thank you the opportunity to show you
the principal areas and projects
of the
Electrical
UNIVERSIDAD
AUTÓNOMA
DE NUEVOan
LEÓN
Mechanical Engineering School. This
school
isMecánica
comitted
Facultad
de Ingeniería
y Eléctrica
to the development of the society which is oriented to
a globalized world under the interaction of the industry,
university, and goverment.
Ing. Esteban Báez Villarreal
Principal
Presentado por:
Ing. Esteban Báez Villarreal
Director
Descargar

Folleto Institucional Ingles - Facultad de Ingeniería Mecánica y