Composite Materials
Dr. Alejandro Manzano Ramírez
[email protected]
[email protected]
October 2007
Bibliografy:
1.
HANDBOOK OF COMPOSITES, SECOND EDITION Edited by S. T. Peters Process
Research, MountainView, Calfornia, USA , Second edition 1998 1998 Chapman &
Hall Thomson Science is a division of International Thomson Publishing
2.
Chapter 6, Composite Materials, Alejandro Manzano Ramírez and Enrique
Barrera, "Synthesis and Properties of Advanced Materials" edited by Carl
McHargue,J.B.Darby,Jr., Miguel José Yacamán, José Reyes Gasga, Kluwer
Academic Publishers,1997,pp. 148-197
3.
F.C. Campbell,Manufacturing Technology for Aerospace Structural Materials,Firts
Edition, Elsevier Ltd 2005
4.
Matthews F.L. and Rawlings R.D. “Composite materials: Engineering and
Science”, ,Woodhead Publishing Ltd and CRC Press LLC,Reprinted 2005
5.
Serope Kalpakjan and Steven R. Schmid, “Manufacturing Processes for
Engineering Materials, Fourth edition Pearson Education , Inc, Reprint 2003
6.
Willian F. Smith “Foundations of materials Science and Engineering”, Third
edition, Mc Graw-Hill 2004
7.
Low-cost composite materials and structures for aircraft applications”, Deo, R.B.,
Starnes, J.H., Holzwarth, R.C.,May 2001
8.
Handbook of Materials Selection, Myer Kutz Associates, Inc.,JOHN WILEY &
SONS, INC.2002
9.
Advance Ceramic Processing and Technology J.G.P.Binner, processing of
ceramic composites ,Noyes Publications 1990, p. 131
Further readings
•
•
•
•
•
•
•
Jean LUYCKX, Composites à fibres de carbone dans le génie civil,
Techniques de l’Ingénieur, traité Plastiques et Composites
A. Manzano-Ramírez, E. Nava-Vazquez and C. Vazquez-López, "Surface
Analysis of an Aluminium Metal Matrix Composite", Scripta Metallurgical
et. Materialia, 1993, vol.29, 9, pp. 1241-1246
A. Manzano-Ramírez, A. Magallanes-Castañeda and F.Ruiz,
"Topographic Features of an 319 Al/SiCp/15p", Scripta Metallurgica et
Materialia, 1994, vol.31,10, pp.1371-1376
Manzano-Ramírez A., Ruiz F. y Magallanes-Castañeda A.,
"Observaciones Microestructurales en el Composite Al/Si/15p Obtenido
por el Procedimiento de Compocolado", Revista de Metalurgia, CENIM
Madrid,España, vol. 32, 6 , Nov-Dic. 1996, pp. 359-368.
Hallen J. M., Balmori H.M.,Jaramillo D.,Estrada J.L.,González J.L.,Cruz
H.S. and Manzano A.,"Influence of Mg and Stirring on the Strength of an
aluminium matrix Composite obtained by Compocasting" , Key
Engineering MATERIALS Vols. 127-131 (1997),pp. 495-502
R. García, A.Manzano, V.H. López, and E. Bedolla., “Comparative
welding study of the Metal Matrix Composite with MIG Welding Process,
using Direct and Indirect Electric Arc”, Met. Trans B Journal, vol. 33B, no.
6, pp. 932 – 937, 2002.
García R., López V.H., Bedolla E. and Manzano A., “The MIG welding
process with Indirect Electric Arc”, J. of Materials Science
Descargar

The Science and Engineering of Materials, 4th ed Donald R